Designed for forward converter, half/full bridge, active clamp Power Range : 150W to 250W Switching frequency : 200kHz to 700kHz optimized

ELECTRICAL SPECIFICATIONS-TINYSWITCH FAMILY (at 25˚C) Units designed to match TNYXXX and TOPXXXseries applications, from Power Integration with universal AC input as designated. Operating temperature: 0˚C-70 C˚

Surface mount board assembly process applicable Designed for switch power supply applications Optimal performance at 100 KHz and above Primary rated for 6 amps AC rms Special design available on customer request.

Low profile – height 4.1mm max. Designed for automatic pick and place. Operating frequency range 10KHz to1MHz. Primary rated for 20 Amps AC rms max. Special design available upon customer request

High Current-primary rated for 35 Amps. Designed for automatic pick and place. Operating Frequency Range: 50KHz to 500KHz. Low profile- height 10 mm maximum.

High Current- primary rated for 35 Amps. Designed for automatic pick and place. Operating Frequency Range up to 100KHz. Low profile- height 7.0 mm maximum.

Secondary furnished Designed for switch power supply applications 2500Vrms primary to secondary Hi-Pot 20-200 KHz Frequency range Encapsulated construction

Primary and secondary furnished Designed for switch power supply application Encapsulated with plastic housing and potting 3750Vrms primary to secondary Hi-Pot 20-200 KHz Frequency

3000 Vrms gate to drive winding test Operating frequency from 50KHz to 500KHz Popular winding configurations

Performance & Specification for 50/60Hz. Insulation Resistance:500V DC, >100MΩ. Operating Temperature -25˚C to 85˚C. Primary Rated current for 5Amps AC rms.

25V/ 70.7V/100 Voltage Line Matching Couple 4 or 8 ohms speakers to 25 or 70.7 or 100 voltage line outputs of amplifiers. Up to 5 power tap levels available (except 100 Voltage which has 4). Primary taps marked in watts(no calculation necessary), to match speaker power. Frequency response reference @ 1K Hz. Insertion loss is less than 1.5 dB @ 1K Hz. Distortion is less than...

The EHS series of universal Transformers is designed and built to meet U.S. and international safety standards. These transformers are available in both PC and chassis-mount construction. With power ratings of 2.5VA to 175VA,these transformers are built on dual-bobbins withinsulating shrouds to provide 4000V RMS isolation between primary and secondary. The non-concentric...