USB 2.0 Image Sensor Processor & Controller (Full HD + MIPI)

• High quality H.264 encoder (Level: 4.1 – Main – 50MBit/s – 1080p30)
• Max sensor resolution 3MP/QXGA/2048×1536
• Support for multi stream (up to 6 streams):
  • Up to 3 MJPG streams
  • Up to 3 H.264 streams
• Support DMIC input interface & I2S digital audio input with UAC 1.0
• Built-in PLL for internal clock generation
• External serial flash needed to store custom settings (external RAM not required)
• 10 bit parallel sensor interface & MIPI-CSI2 (1 clock lane w/ 1 data lane @ 1Gb/s)

USB 2.0 Image Sensor Processor & Controller

The superior image signal processing engine brings sight video experience. The high performance Motion-JPEG / H.264 compression engine makes variant compression ratio to satisfy bandwidth requirement. SN9C291B is compliant with USB Video Class and Audio Class. With the integrated sensor interface and color processing engine, it can support most available CMOS sensors that range from VGA to 2MP. SN9C291B is controlled by an embedded micro-controller, while statistics for 3A (AE / AWB / AF) are built-in. The flexible architecture is consisted of mask ROM, internal RAM and external serial-flash which can store the customized codes and parameters. With the highly-integrated firmware architecture and the development kit provided by SONiX, it’s easy for 3rd party to fulfill customized features.

Features:

• 10bit Parallel Image Sensor interface (for MIPI version please see SN9C292A): 2MP (UXGA 1600×1200) support
• 3.3V (analog, I/O), 2.5V(DDR) & 1.2V (core) external power supply are necessary
• Low power consumption of suspend, standby & preview mode
• Input oscillator frequency of 12MHz
• Using external serial flash to store customized code and data (default 128KBytes)
• Support of Multi Streams up to 4 Streams at same time (MJPG support up to 2 Streams and H.264 support up to 2 Streams)
• High High Quality H.264 Encoder, Main Profile Level: 4.1, support up to 720p (HD)
• Built-in PLL for internal clock generation

SN9C283A is a USB 2.0 High-Speed compatible camera controller. The advanced power design provides low power consumption whenever device is under suspend, standby or operation mode.

SN9C283A is a USB 2.0 High-Speed compatible camera controller. The advanced power design provides low power consumption whenever device is under suspend, standby or operation mode.

SN9C283M is a USB 2.0 High-Speed compatible camera controller. The advanced power design provides low power consumption whenever device is under suspend, standby or operation mode.

SN9C283A is a USB 2.0 High-Speed compatible camera controller. The advanced power design provides low power consumption whenever device is under suspend, standby or operation mode.

USB2.0 Video Class WebCamera Controller

The SN9C271M is a USB 2.0 High-Speed (HS) compatible PC camera controller.

The SN9C271A is a USB 2.0 High-Speed (HS) compatible PC camera controller.

The SN9C270M is a USB 2.0 High-Speed (HS) compatible PC camera controller.

The SN9C270A is a USB 2.0 High-Speed (HS) compatible PC camera controller.

Package Type:QFN64 7.5*7.5, BGA81 5*5; HDMI/MIPI to Type C (DP) with PD and USB3.1 MUX Switch

Package Type:QFN64 7.5*7.5

Package Type:QFN100 14*14; 2 port MIPI DSI/CSI switch, support DSC to HDMI 2.0, TX, with 4 port to 2 port MIPI switch, QFN128 14×14

Package Type:QFN64 7.5*7.5; MIPI DSI/CSI to HDMI 1.4, TX, QFN64 7.5×7.5

Automotive Deserializer Series, Automotive DP to eDP, 5.4Gbps forward data channel

Automotive Serializer Series, LVDS/Mipi/TTL to Automotive DP, 5.4Gbps forward data channel

Automotive Deserializer Series, Automotive DP to Mipi, maximum four 4.32Gbps forward data channels

Automotive Deserializer Series, Automotive DP to LVDS/Mipi/TTL, maximum 5.4Gbps forward data channel

Automotive Serializer Series, Mipi/TTL to Automotive DP, 4.32Gbps forward data channel

Package Type:QFN128 14*14; LVDS to MIPI / MIPI to LVDS convertion or repeating with +/- 90 degree video rotation

MIPI/TTL/2-Port LVDS to MIPI/TTL/2-Port LVDS Converter IC

• Compliant with DCS1.02, D-PHY1.2, DSI1.2 and CSI-21.00
• Compliant with VESA and JEIDA standard
• Alternative Input and Output configuration for MIPI/LVDS/TTL
• MIPI/LVDS input mux and output split supported
• MIPI/LVDS bypass signal level shift for FPGA
• Support 100KHz and 400KHz I2C Slave
• Up to 1920x1200px/60Hz or any other resolution up to 200 MHz 
• Temperature Range: -40°C – +85°C

Package Type:QFN64 7.5*7.5, BGA81 5*5; LVDS to MIPI DSI/MIPI CSI

Package Type:QFN64 7.5*7.5, BGA81 5*5; TTL(RGB) to MIPI DSI/MIPI CSI

Single-Channel MIPI® DSI Bridge to LVDS/HDMI

• Compliant with HDMI 1.4
• Maximum Resolution 1080p60
• Support MIPI DSI Non-Burst Mode (Continue Mode)
• MIPI 1-clock lane and 1-4 data lanes up to 1.5Gbps per data lane
• 1 Channel LVDS Transmitter and HDMI 1.4 Output
• No DDC & HDCP Support
• Single 1.8V Power Supply
• Temperature Range -40°C ~ +85°C

Datasheet: LT8912B – Lontium Semiconductor

Package Type:QFN48 6*6

Package Type:QFN64 9*9

Package Type:QFN64 7.5*7.5, BGA81 5*5; MIPI DSI/MIPI CSI to LVDS level-shifter

Package Type:QFN64 7.5*7.5, BGA81 5*5; MIPI DSI/MIPI CSI repeater

Package Type:QFN64 9*9; HDMI/MHL RX (BT656/1120 ourput)

Package Type:QFN88 10*10; Type C (DP 1.2) TX, RGB to DP/eDP

Package Type:QFN76 9*9; Type C (DP) to HDMI2.0 + VGA with integrated CC1/CC2, MCU, BB, audio

Package Type:QFN128 14*14; Type C (DP) to MST (HDMI2.0+HDMI1.4) + VGA with integrated CC1/CC2, MCU, HDCP Key

Package Type:QFN88 10*10; Type C (DP) to MST HDMI2.0+ VGA with integrated CC1/CC2, MCU, HDCP Key

Package Type:LQFP128 14*14; Type C (DP) to MST (HDMI1.4+HDMI1.4) + VGA with integrated CC, MCU, HDCP Key

Package Type:QFN48 6*6; Type C (DP) to VGA with integrated CC, QC?MCU, BB, support audio output

Type-C/DP to HDMI2.0 Converter with USB3.0 Switch and Audio Output

2-Lane Type-C/DP to HDMI2.0 Converter with PD3.0

4-Lane Type-C/DP to HDMI2.0 Converter

Package Type:QFN88 10*10; Type C (DP) to HDMI 2.0 with integrated CC1/CC2, MCU, HDCP Key, USB switch, Audio

Package Type:QFN64 7.5*7.5; Type C (DP) to HDMI 2.0 with integrated CC, USB3.1 switch, MCU, BB

Package Type:QFN64 7.5*7.5; Type C (DP) to HDMI 1.4 with integrated CC, MCU, HDCP Key

Type-C/DP1.4 to HDMI2.1 Converter

Package Type:QFN64 7.5*7.5; Type C (DP) to HDMI 2.0 with integrated CC1, MCU, HDCP Key, compatible with LT8711H-C

Package Type:QFN64 9*9; Dual-mode DP to VGA , with audio out

Package Type:QFN40 5*5; DP repeater (analog)

LT8668SX can be configured to work under HDMI2.1 standard with maximum 8Gbps data rate to allow for the highest resolutions of 8K@60Hz with compression data or 8K@60Hz YUV 4:2:0 or 8K@30Hz. LT8668SX also can be configured to work under DP1.4 with up to 8.1Gbps data rate to allow for the highest resolutions of 8K@60Hz with compression data or 8K@30Hz YUV 4:2:2 or 8K@30Hz YUV 4:2:0.

Package Type:LQFP128 14*20; 4K LCD controller (scaler), HDMI1.4/MHL2.0/VGA inputs

Package Type:TQFP100?14×14?; 4×4 HDMI/DVI matrix switch

HDMI 2.0 4-in 2-out Matrix switch with audio input/output and scaler

Package Type:BGA144 ?10×10)/ QFN128 14*14 EPAD; HDMI2.0 switch, no audio out

Package Type:TQFP100?14×14?EPAD; HDMI 1.4 4-to-1 switch with repeater and audio out

Package Type:TQFP100?14×14?EPAD; HDMI 1.4 4-to-1 switch with audio out

LT86404UX 4-in 4-out HDMI2.0 Matrix switch and splitter with scaler, HDCP2.3 engine and audio input/output

Package Type:QFN64 9*9 ; HDMI 2.0 3-to-1 Switch,without audio out

Package Type:QFN64 9*9 ; HDMI 1.4 3-to-1 Switch,without audio out

Package Type:QFN76 9*9 EPAD; HDMI 1.4 2-to-1 switch with repeater, Integrated with MCU

2-in 4-out HDMI 2.0 splitter with scaler, HDCP 2.3 engine and audio input/output

Package Type:QFN76 9*9 EPAD; HDMI1.4/MHL2.0 dual-mode RX with out Scaler

Package Type:QFN76 9*9 EPAD; HDMI1.4/MHL2.0 dual-mode RX with Scaler

Package Type:QFN64 9*9 ; HDMI 1.4, TX, with upgrade on audio, etc. QFN64 9×9;

Package Type:LQFP80 12*12; HDMI 1.4 TX, with upgrade on audio,etc. LQFP 80, 12×12

Package Type:QFN64 9*9 ; HDMI 1.4, TX, QFN64 9×9;

Package Type:LQFP80 12*12; HDMI 1.4 TX, LQFP 80, 12×12

Package Type:QFN76 9*9 EPAD; MHL/HDMI to VGA/YPbPr & HDMI with integrated MCU

Package Type:LQFP80 ?1212?; MHL/HDMI to VGA/YPbPr & HDMI

Package Type:QFN128 14*14 EPAD; HDMI2.0 1-to-4 splitter, 6Gbps

Package Type:LQFP128 EPAD; HDMI 1.4, with repeater and full features

Package Type:LQFP128 EPAD; HDMI 1.4, with all features

1-in 2-out HDMI 2.0 splitter with scaler, HDCP 2.3 engine and audio input/output

Package Type:TQFP100 14*14 EPAD; HDMI2.0 1-to-2 splitter, 6Gbps

Package Type:LQFP80 12*12; HDMI 1.4, 4Kx2K, with epeater best performance

Package Type:LQFP80 12*12; HDMI 1.4, 4Kx2K, better performance

Package Type:QFN40 5*5; HDM 2.0 repeater (analog)

Package Type:QFN64 7.5*7.5; HDMI 2.0 repeater, 4Kx2K, 60Hz

Package Type:QFN48 7*7; HDMI 1.4 repeater, 4Kx2K,30Hz

Package Type:QFN48 7*7; HDMI 1.4 repeater

Package Type:QFN64 9*9 ; VGA to HDMI converter.

Package Type:TQFP100 14*14

Package Type:QFN64 9*9

Package Type:QFN40 5×5; Dual port USB 3.0 repeater

Package Type:QFN40 5*5; type C emarker

Package Type:QFN20 4*4; True USB2.0 1-to-2 MUX with Repeater

Package Type:QFN16 4*4; True USB2.0 Repeater,USB cable

Package Type:QFN64 7.5×7.5 EPAD; True USB2.0 Repeater on CAT5/6 single differential pair

Package Type:TSSOP20; True USB2.0 Repeater,CAT5/6 cable

Type-C/DP 1.4 to 4-Port MIPI/LVDS with Audio

• Compliant with DisplayPort 1.4a (DP 1.4a) & Embedded DisplayPort 1.4b (eDP 1.4b)
• Type-C DisplayPort Alt Mode
• Maximum resolution 4k120Hz / 8k30Hz (8k60Hz with DSC (Digital Stream Compression))
• Maximum bandwidth 32.4Gbps
• Support for repeater function of HDCP 2.3 RX/TX to realize long cable connections
• 1/2/4-port (configurable) MIPI 1-clock lane and 1-4 data lanes
  • D-PHY: 2.5Gbps per data lane (= 40Gbps for 4 ports)
  • C-PHY: 5.7Gbps per data lane (= 68.4Gbps for 4 ports)
• 1/2/4-port (configurable) LVDS 1-clock lane and 3-5 data lanes
  • 1.2Gbps per data lane (= 24Gbps for 4 ports)
• Embedded SPI flash for firmware and HDCP keys
• Firmware update through SPI/I2C/USB
• Up & down scaler up to 4k
• Temperature range: -40°C to +85°C

Application area: VR, video conferencing, display

Product brief: LT7911UXC – Lontium Semiconductor

Type-C/DP1.4 to 4-Port MIPI CSI/DSI with Audio, LPDDR inside

Package Type:QFN64 7.5×7.5; Type C/DP to 2-port MIPI DSI/CSI, support HDCP 1.3, with integrated MCU, 3D slitter

Package Type:BGA144 7×7; Type C / DP to 4-port MIPI DSI/CSI, support 3D splitter, HDCP 1.3, with integrated MCU, BGA package

Package Type:QFN128 14*14; Type C / DP to 4-port MIPI DSI/CSI, support 3D splitter, HDCP 1.3, with integrated MCU

Type-C/DP1.4 to 4-Port LVDS with Audio, LPDDR inside

Package Type:QFN64 7.5×7.5; type C/DP to 2-port LVDS, support HDCP 1.3, with integrated MCU , 3D splitter

Package Type:BGA144 7×7; Type C / DP to 4-port MIPI DSI/CSI, support 3D splitter, HDCP 1.3, with integrated MCU, BGA package

Package Type:QFN128 14*14; Type C / DP to 4-port LVDS, support 3D splitter, HDCP 1.3, with integrated MCU

Package Type: QFN64 7.5*7.5

Package Type:QFN128 14*14; HDMI 2.0 to 4 port MIPI CSI/DSI receiver, support DSC and HDCP2.2, QFN128 14×14

HDMI 2.1 Receiver (4-Port MIPI + Audio) – LPDDR Inside

• Compliant with HDMI 2.1 specification
• HDCP 1.4/2.2/2.3 Support
• Maximum Resolution 8k30Hz (8k60Hz with Display Screen Compression)
• 4-port MIPI CSI/DSI transmitter
• Built-in zoom scaler (up & down)
• 3.3V/1.1V Power Supply
• Temperature Range -40°C – +85°C

Package Type:QFN64 7.5×7.5; HDMI1.4 to 2-port MIPI DSI/CSI, support 3D splitter, with MCU

Package Type:BGA144 7×7; Type C / DP to 4-port MIPI DSI/CSI, support 3D splitter, HDCP 1.3, with integrated MCU, BGA package

Package Type:QFN128 14*14; HDMI1.4 to 4-port MIPI DSI/CSI, support 3D splitter, with MCU

HDMI2.1 to DP1.4 with Type-C

Package Type:QFN64 7.5*7.5

Package Type:QFN128 14*14; HDMI 2.0 to 4 port LVDS receiver, support HDCP2.2, QFN128 14×14

HDMI2.1 Receiver(4Port LVDS+Audio), LPDDR inside

Package Type:QFN64 7.5×7.5; HDMI1.4/dual-mode DP to 2-port LVDS, support 3D splitter, with MCU

Package Type:BGA144 7×7; Type C / DP to 4-port MIPI DSI/CSI, support 3D splitter, HDCP 1.3, with integrated MCU, BGA package

Package Type:QFN128 14*14; HDMI1.4/dual-mode DP to 4-port LVDS, support 3D splitter, with MCU

Package Type:QFN128 14*14; LVDS to MIPI / MIPI to LVDS convertion or repeating with +/- 90 degree video rotation

Package Type:QFN64 7.5*7.5; 2 port LVDS to HDMI 1.4, TX, QFN64 7.5×7.5

Package Type:QFN100 14*14; 4 port LVDS to HDMI 2.0, TX, QFN100 14×14